Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Aubrey
Gate motor and opener service in Aubrey, TX typically runs $180 to $340 for a repair call, while full opener replacements on a heavy custom gate generally land between $1,400 and $3,800. Most repair visits to Aubrey homes are completed in a single trip. We serve the ranch-acreage corridor along FM 428, 2931, and the Sandbrock Ranch area, and we answer the phone live, 24/7, at (432) 547-6481.
Aubrey is not a typical suburb. The properties out here - many 1 to 5 acres or more - carry long private drives, heavy ornamental iron gates, and automation that has to hold up against clay soil movement and North Texas wind. That is not a job for a generalist handyman. Our Gate Motor & Opener crew understands how these gates are built and why they fail. We get on them before the gate leaves a horse trailer stuck on one side of the fence or an open driveway at night.
Why Ironworks Gate Co. Is Aubrey’s Preferred Gate Motor & Opener Company
Ironworks Gate Co. has been doing gate work for over 42 years, since 1984. In that time we have learned that Aubrey’s gate problems follow a pattern. The soil here is Blackland Prairie clay. It swells when it rains and shrinks when it dries. That movement shifts hinge posts, binds opener arms, and wears out rack and pinion drives on long ranch gates. A technician who does not know that will replace a motor and call it fixed. The gate binds again in eight weeks. We repair the post first. The motor matters only after the structure is square and plumb.
Our Aubrey customers tend to be people who have lived on their property for twenty years or more. They have seen contractors come and go. They want the job done once, correctly, with a written guarantee. Every job we complete carries the 90-Day Done Right Promise - if it is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard, and it applies to every motor repair, opener installation, and battery backup we put in across Aubrey and the surrounding Denton County acreage.
We also know this area well enough to say plainly what we can and cannot do in one trip. Dispatch for our Aubrey crews is coordinated from our Dallas-Fort Worth office. A live person answers the phone 24 hours a day, 7 days a week - not a voicemail tree, not an answering service. If your gate motor fails at 6 a.m. on a Saturday and you need to get a trailer out, you will speak to a person.
Our Gate Motor & Opener Services in Aubrey
Motor Installation
We install swing and slide gate operators matched to the weight, width, and duty cycle of your actual gate - not whatever opener was on sale at the hardware store. On Aubrey’s custom iron gates, that usually means a heavy-duty operator with proper thrust bearings and limit adjustments set to the gate’s true travel. We anchor posts to depth, account for the local clay, and do not leave an opener hanging on steel that will shift in the first wet season.
Motor Repair
Motor repair is the bread-and-butter call across Aubrey. We see burned capacitors on older operators, stripped drive gears, failed limit switches, and control boards shorted by lightning strikes that roll through in the spring. Our technicians have the training to diagnose and repair motors and opener electronics on the first visit, and we carry common control boards, capacitors, and gear kits on the truck when heading to Aubrey so you are not waiting on a part shipment.
Linear Motor
Linear motor openers are a common choice on newer slide gates in Aubrey’s post-2015 custom homes. They are quiet and smooth when installed right. The problem we see repeatedly is that the motor was mounted on posts poured too shallow or with undersized footings, so as the clay moves, the rack and pinion fall out of alignment and the motor strains. We re-set the post, re-align the rack, and tune the operator so it stops eating itself. A linear motor should run for years, not six months.
Slide Motor
Long ranch driveways in Aubrey often use slide gates because they handle wind better than a swinging panel on a wide opening. But a slide gate is only as good as its track and rollers. We service and replace slide motors on properties around Sandbrock Ranch and the acreage north of 380, and we replace bent track, worn rollers, and broken rack sections at the same time as the motor work, because a new motor on a bad track just tears itself up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aubrey
Our technicians are trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule. We are not married to one manufacturer. If your Aubrey gate runs on a Viking, a BFT, or a DoorKing, we service it the same way: diagnose the actual fault, quote the repair before we turn a bolt, and stand behind the work with the 90-Day Done Right Promise. We stock common parts for these systems and bring them to Aubrey on the truck.
Common Gate Motor & Opener Problems We See in Aubrey Homes
- Fall post heave on swing gates. After a dry North Texas summer, the first fall rains make the Blackland Prairie clay swell, shifting hinge posts out of plumb. Our crew was called to a custom iron swing gate on a 3-acre horse property near Sandbrock Ranch last October. The FAAC opener was binding because the hinge post had heaved. We re-set the post footing, replaced the worn hinge pins, and re-synced the opener’s limits. The gate has not sagged since.
- Shallow footings on post-2015 builds. Many newer Aubrey custom homes went up fast, and the gate footings were part of the rush. We see slide-gate posts poured too shallow, which lets panels sag and racks strips wear in a season or two. You can hear it as a grinding sound.
- Wind damage from spring storms. Straight-line winds across exposed ranch properties flex the gate panels and loosen the mounting bolts on opener arms. That misalignment throws off the safety photocell beam, and then the gate will not close on command because the photo eye thinks something is in the path.
- Lightning strikes on control boards. Aubrey gets its share of thunderstorm activity, and a nearby strike can fry a board even when the motor itself is fine. We keep replacement boards for major brands on hand and can usually restore function the same day.
Pricing for Gate Motor & Opener in Aubrey, TX
What you pay depends on the job, and we would rather give you real numbers than a vague promise. A service call and motor repair in Aubrey typically runs $180 to $340 for labor plus parts, depending on what failed. A capacitor or limit switch replacement might be under $200. A full opener replacement runs $1,400 to $2,800 for a standard swing or slide gate, and $3,000 to $3,800 for a heavy custom iron gate on an acreage driveway that needs a heavier-duty operator, upgraded hinges, and post adjustments. Battery backup installation runs $350 to $650 depending on the opener and battery capacity. Every price is quoted and agreed before any work starts, and we will hand you a written number before we touch the first bolt. Estimates are free. Call (432) 547-6481.
| Service | Typical Aubrey Price Range |
|---|---|
| Motor repair (labor + common parts) | $180 - $340 |
| Capacitor or limit switch replacement | $150 - $250 |
| Standard opener replacement (swing or slide) | $1,400 - $2,800 |
| Heavy custom iron gate opener replacement | $3,000 - $3,800 |
| Battery backup installation | $350 - $650 |
| Seasonal tune-up (standing offer) | $89 |
We Also Serve Cities Near Aubrey
Our crews serve the full corridor around Aubrey, including Frisco, Little Elm, Prosper, and Lake Dallas. If you are on a ranch or acreage lot in this part of Denton County, the same crew and the same 90-Day Done Right Promise apply. Read more about how we cover Aubrey specifically, or call us for any property in the surrounding area.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Aubrey
Your hinge post is heaving. Aubrey sits on Blackland Prairie clay that shrinks during summer drought and swells when fall and winter rains return. That movement pushes the post out of plumb, and the opener arm binds as the gate swings through its travel. The fix is re-plumbing the post and replacing the hinge pins before adjusting the opener limits - not lubricating the hinge or replacing the motor. Call (432) 547-6481 for a free estimate on post re-setting and opener re-alignment.
On open, wind-exposed acreage gates, we recommend testing the safety photocell at least twice a year, and once right after any major spring storm. Wind flex can knock the photo eye out of alignment, which stops the gate from closing, or worse, disables the auto-reverse safety function while the gate still looks like it is working. You can test it by blocking the beam with a shovel handle and pressing close. If the gate does not reverse, call us and we will get it sorted.
Yes. We install battery backup kits on LiftMaster, FAAC, Mighty Mule, and most other operators we service. On horse properties, the practical reason is straightforward: a power outage during a storm means an open gate and an open pasture fence. A battery backup keeps the gate operable for a limited number of cycles until power returns. The installed cost in Aubrey typically runs $350 to $650. Call us for an exact quote, and we will confirm your opener model and capacity before we order anything.
You need a heavy-duty swing operator rated for the actual weight, width, and duty cycle of that gate, and you need it mounted on a post that is set deep enough to hold up to Aubrey’s clay soil movement. We do not put residential-grade openers on 16-foot custom iron gates serving a ranch driveway. The right solution is usually an industrial-grade swing arm operator with a properly poured pad or post footing, plus a battery backup if the gate also serves as animal containment.
Yes. Many gates in Aubrey with keypad and remote-only entry do not have a ground loop detector at all. When we install a loop detector on a ranch gate, we cut the pavement or gravel, lay the loop, and wire it into the opener so the gate opens automatically for exiting vehicles. That upgrade is more common on horse properties than people realize, because it keeps the gate from being left open when someone drives out in a hurry. We can quote the loop installation alongside any opener repair.
Contact Ironworks Gate Co. in Aubrey
If your gate motor is acting up, or you are planning to replace an operator on a custom Aubrey gate, call us. We will talk through what you are seeing, ask a few questions about the gate and driveway, and if a visit makes sense, we will schedule it and show up when we say. The price is settled before work begins, and every job carries the written 90-Day Done Right Promise. We also honor a $50 discount on any repair over $250, a free second opinion on any written estimate, the $89 seasonal tune-up, and a 5% senior and veteran discount on every job. Call (432) 547-6481 for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Aubrey and Denton County since 1984.