Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lewisville
Most gate failures in Lewisville are not what they first appear. A sagging gate on a 1980s tract home in 75057 usually looks like a hinge problem, but underneath it is often a post footing being pushed sideways by Blackland Prairie clay. That distinction decides whether you pay for a repair that holds, or one that fails again in a single wet season. Ironworks Gate Co. has been sorting out exactly this problem for over 42 years, and our Gate Parts & Welding team does the work right the first time. Call (432) 547-6481 and a live person answers, day or night.
Why Ironworks Gate Co. Is Lewisville’s Preferred Gate Parts & Welding Company
Lewisville homeowners have a specific frustration: they have called a generalist who swapped a hinge, collected a check, and the gate sagged again by spring. We hear that story regularly across 75029, 75057, and 75067. The difference with our shop is that we diagnose the structure underneath the hardware. In Lewisville’s clay soil, a hinge fix without checking the post is half a repair. Our technicians are background-checked, uniformed, and trained to ask the question the last guy did not: is this post still plumb, or did the clay move it?
Every job we finish in Lewisville carries our 90-Day Done Right Promise, in writing. If the gate is not right, we come back and make it right. No arguing, no paperwork, no exceptions. That is the Keystone Standard, and it applies whether we are welding a broken rail on a Castle Hills ornamental gate or replacing a rotted cedar post off Round Grove Road. Customers in Lewisville also get $50 off any repair over $250, and a permanent 5% senior and veteran discount.
Our Gate Parts & Welding Services in Lewisville
We do the full range of gate parts and welding work across Lewisville, from small hinge replacements to full post resets and custom fabrication. Here is what that looks like on the ground in your neighborhood.
Post Replacement
This is the service Lewisville’s older homes need most, and the one most often skipped. Gate posts set in the 1980s and 1990s around 75057 were commonly poured with concrete collars only 18 to 24 inches deep. Denton County’s expansive clay heaves and shrinks several inches between wet winters and dry summers, and it has spent 30 years pushing those shallow footings off true. We cut the old post at grade, auger a new footing below the active clay zone, and set a fresh post that will not move. In our experience, a post reset beats another hinge adjustment every time.
Hinge Replacement
A worn hinge on a Lewisville gate is often the symptom, not the illness. When the post behind it has moved, new hinges bind within months. That said, we replace plenty of hinges on gates where the post is sound. Heavy-duty strap hinges, barrel hinges, weld-on hinges, and concealed hinges for ornamental gates. We weld or bolt them square, and if the post is the problem, we say so before we touch the hinge. You get the full diagnosis first, not a surprise in the invoice.
Rail Repair
Wood gate rails split along the grain after decades of North Texas heat and humidity. Steel rails on ornamental gates crack at the weld points, especially after an ice event like February 2021 when cold-loaded metal gets brittle. We weld steel and aluminum rails in place or in-shop, and for wood gates we sister or splice rails using structural screws and steel brackets that hold better than the original nails. If a rail is too far gone, we will tell you that replacement is cheaper than endless patching.
Custom Welding
Some Lewisville gate repairs cannot be fixed with parts off a shelf. A 1980s ornamental gate with an unusual hinge spacing, a custom latch plate that a builder fabricated forty years ago, or a steel frame that needs a section rebuilt. Our welders handle these in-shop or on-site, matching the original metal type so the repair does not stand out. We have rebuilt gate frames, fabricated new hinge straps, and welded custom brackets for operators mounted on awkward post layouts across Lewisville.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lewisville
We maintain and repair gate parts for the operators most common around Lewisville: DoorKing, Elite, Mighty Mule, and LiftMaster among others. For older systems in the 75057 corridor, we regularly source replacement control boards, limit switches, and safety edge hardware that general contractors cannot find. When parts are still available, we repair them. When a board is discontinued, we retrofit compatible controls rather than forcing you into a full replacement. That is a judgment call we make with you, up front, before any work begins.
Common Gate Parts & Welding Problems We See in Lewisville Homes
- Clay-induced post heave disguised as hinge wear. In the 75057 zip, many original gate posts sit in shallow concrete collars that the Blackland Prairie clay has shifted sideways over decades. The gate binds on the latch post or drags the driveway, but the real repair is a post reset, not a new hinge.
- Rotted cedar posts below grade. The 1980s and 1990s build-out across Lewisville used cedar posts without modern drainage or pressure treatment depth. After 30-plus years in wet clay, the base rots out while the top looks fine, causing the whole gate to lean.
- Post-freeze weld cracks on ornamental gates. After the February 2021 ice storm, we saw a surge of swing gates with cracked hinge welds and snapped springs. Cold-loaded steel gets brittle, and an old weld with no gusset is usually the first thing to fail.
- Obsolete control boards on 1990s operators. Lewisville’s older automatic gates, especially the 1990s-era units around the original subdivisions, lose control boards after years of brownouts and voltage drops. The operator is still mechanically fine, but the board is dead, leaving the gate stuck open or closed until retrofitted.
Last spring we rebuilt a sagging cedar swing gate on a 1980s tract home off Round Grove Road in 75057. The original hinge post had a concrete collar only 18 inches deep, and the clay had heaved it nearly four inches out of plumb. We cut the old post at grade, augered a new footing past the active clay zone, welded a fresh hinge post into place, and remounted the original gate panel with new heavy-duty hinges. The gate has stayed true through summer drought and spring rains, and the safety photocell on the adjacent LiftMaster operator now aligns without binding.
Pricing for Gate Parts & Welding in Lewisville, TX
Gate parts and welding prices in Lewisville depend on what you are fixing and whether the post is involved. Here are the honest ranges we quote across the 75029, 75057, and 75067 zip codes:
- Hinge replacement (single gate, hardware and labor): $90-$220
- Post replacement (new post, concrete footing past the clay zone, reset gate): $280-$550
- Rail repair (wood or steel, on-site): $120-$300
- Custom welding (cracked frame, broken hinge strap, custom bracket): $150-$450
- Control board retrofit for an older operator: $320-$680
Every quote is agreed in writing before we turn a single bolt. No surprises on the bill. You get the price first, and it does not change unless you add work. We also offer a free second opinion on any written estimate from another company. That has settled a lot of arguments in Lewisville over the years.
We Also Serve Cities Near Lewisville
Beyond our local work across Lewisville, our Gate Parts & Welding in Lewisville service area extends to Lake Dallas, The Colony, Little Elm, and Frisco. If you are a few minutes outside the city line, call us and ask. Chances are we are already working your street this week.
Serving Lewisville, TX - Our Local Coverage Area
We’re based in the Lewisville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lewisville
Because the post has moved, not the hinges. In Lewisville’s Blackland Prairie clay, spring rains swell the soil and push shallow-set posts off plumb. A 1980s gate post with an 18-inch concrete collar will heave a fraction of an inch every wet season, and after thirty years that adds up to an obvious sag. Adjusting hinges on a post that is no longer vertical will not fix it. The repair is a post reset with a footing below the active clay line. Call (432) 547-6481 and we will confirm it with a level before we quote anything.
No, a weld will not help a rotten post. Cedar posts from Lewisville’s 1980s build-out rot below grade, and welding a hinge onto the sound-looking upper section just concentrates stress on decaying wood. The post needs to come out and be replaced with a pressure-treated post set in concrete past the clay movement zone. We do this regularly across 75057, and it costs between $280 and $550 depending on the gate size and condition. The quote is agreed before we start.
In most cases we can retrofit. A 1990s DoorKing, Elite, or Mighty Mule operator with a dead board can often run on a compatible current control board. The motor, arms, and gearbox are usually still solid. We have done retrofit board swaps across Lewisville for $320 to $680, including programming and safety checks. Only when the motor or gearbox is also failing does full replacement make more sense. We will show you the options and the price for each before you decide.
Yes, we saw a sharp increase in cracked hinge welds and broken springs after the February 2021 ice event. Cold-loaded steel gets brittle, and a weld with no reinforcing gusset cracks under the added load of ice and wind. Older ornamental gates in Lewisville’s established neighborhoods were especially affected. A cracked hinge weld on a steel gate typically runs $150 to $300 to repair and reinforce. If your gate has been dragging since that storm, the weld is a likely culprit.
Yes. Older automatic gates installed before modern entrapment protection rules can be retrofitted with safety photocells, loop detectors, and pressure-sensitive edges. This is work we do regularly on 1990s-era installations around Lewisville. The parts cost varies, and the labor is straightforward on most swing gates. We will quote the full retrofit before touching anything. A gate that reverses on contact or stops on detection is a much safer gate, especially with kids and delivery vehicles in the driveway.
If your gate is sagging, binding, or locked up in Lewisville, call (432) 547-6481. A live person answers 24 hours a day, every day. We will give you an honest diagnosis and a written price before any work starts. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lewisville and surrounding North Texas communities.