Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Shady Shores
Gate hardware fails faster on Lake Lewisville shoreline than almost anywhere else in Denton County. That is not marketing talk. It is what 42 years of tearing apart rusted hinges, seized rollers, and snapped posts has taught us. At Ironworks Gate Co., our Gate Parts & Welding crews know exactly which components give out first on a Shady Shores lakefront property, and we keep the right repair parts on the truck to handle most failures in one trip. If your gate sags, drags, sticks, or refuses to close on its operator, call (432) 547-6481 and we will get someone to your driveway fast.
Why Ironworks Gate Co. Is Shady Shores’s Preferred Gate Parts & Welding Company
Shady Shores is not a drive-through town for us. We work these streets week in and week out, from Shady Shores Dr. down to the quieter cul-de-sacs off Lakeview and Post Oak. Homeowners here know what lake humidity does to steel. They have watched a gate that was hung correctly ten years ago start to droop and grind, and they do not want a patch job. They want the post re-set, the hinge rebuilt, and the panel re-squared so the operator stops fighting the gate.
Every technician who rolls into Shady Shores is background-checked and uniformed, and every job is covered by our written 90-Day Done Right Promise. That means if something is not right, we come back and make it right. No paperwork, no arguing. Victor Salinas built this company on that standard, and our crews in the field carry it on every single job. We also answer the phone with a live person, 24 hours a day, 7 days a week. When a gate will not close at 9 p.m. on a Saturday, you talk to us, not a voicemail tree.
Our Gate Parts & Welding Services in Shady Shores
Hinge Replacement
On lakefront lots in Shady Shores, hinges are almost always the first casualty. Wind-driven spray off Lake Lewisville keeps steel damp year-round, and painted mild-steel hinges lose their coating within a few seasons. Once the pins seize or the barrel wears oval, the gate drags, the opener strains, and the panel starts pulling away from the post. We cut out the old hinge, weld in a replacement with a heavier barrel and greaseable pin, and re-hang the panel so it swings true. Most hinge replacements in Shady Shores run $180 to $340 per hinge set, depending on gate weight and panel size.
Post Replacement
North Texas clay behaves badly near the lake. Shady Shores sits on expansive clay that stays moist year-round from the water table, and that means gate posts shift. A post that leans even a few degrees throws an automatic swing or slide gate out of alignment and causes repeated operator faults. We replace rotted or leaning posts with galvanized steel set in deeper concrete footings, often adding a weep hole or drainage stone to control the moisture that caused the original failure. Post replacement in Shady Shores generally runs $400 to $850 per post, including concrete and re-hanging.
Rail Repair
Slide gates on older Shady Shores estates often ride on rail systems that were sized for the original gate, not for the heavier panel a later owner added. The rail sags, the rollers flatten, and the operator burns through its limits. We repair and reinforce existing rail sections where the steel is sound, and replace rail outright when the original is too far gone. Rail repair in Shady Shores usually falls between $250 and $650 depending on linear feet and whether we are reinforcing or replacing.
Custom Welding
Ornamental iron gates on lake homes built from the late 1980s through the 2000s often have scrollwork, finials, and panel joints that crack from years of wind load and rust expansion. We weld cracked pickets, rebuild broken panel corners, and fabricate replacement sections that match the existing profile. If you need a new gate built to fit an existing opening, we can fabricate and install a custom panel sized for your posts and operator. Custom welding in Shady Shores typically runs $150 to $450 for a repair, and full custom panel fabrication starts around $1,200 depending on dimensions and ornamentation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shady Shores
Most gate failures in Shady Shores are mechanical, not electronic, but when an operator is part of the problem, we service the brands actually installed on these lots: LiftMaster, FAAC, and Elite are the most common we see on lakefront estates here. Our trucks carry replacement circuit boards, limit switches, and gear sets for these systems, which means we can usually repair an operator the same visit we diagnose it. If the board has failed from heat and humidity exposure, we replace it and then seal the housing so the next one lasts longer.
Common Gate Parts & Welding Problems We See in Shady Shores Homes
- Dock and seawall gate hinge failure. The gate down by the water corrodes faster than the street gate. Hinge posts rot at grade, pins seize, and the gate sags until it will not latch or close at all.
- Safety photocell faults caused by post shift. Expansive clay near the shoreline moves seasonally. A post that tilts even slightly throws the safety beam out of alignment and the operator refuses to close, even though the sensors look fine.
- Operator board and gear set failure from heat and humidity. Summer days above 100°F combined with lake-surface moisture cook low-grade plastic gear sets and corrode circuit boards. Intermittent keypad failures are usually a board issue, not a wiring issue.
- Corroded slide gate rollers and track. Rollers on lakefront slide gates rust and flat-spot, then the gate drags and the operator strains. Sealed-bearing stainless rollers solve it, but less than half the gates we inspect in Shady Shores have them installed.
Pricing for Gate Parts & Welding in Shady Shores, TX
Gate repair costs in Shady Shores land in a predictable range. Hinge replacement runs $180 to $340 per hinge set. Post replacement runs $400 to $850 per post. Rail repair runs $250 to $650. Custom welding runs $150 to $450 for repairs, with full panel fabrication starting around $1,200. The main cost drivers are gate weight, whether the post footing needs to be deepened for clay movement, and whether the original hardware was mild steel or galvanized. We quote every job before any work starts. You agree to the number, we do the work, and that is the number on the bill. Call (432) 547-6481 for a free estimate. Active offers: $50 off any repair over $250, and a permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Shady Shores
While Shady Shores keeps our crews busy on lakefront estates, we also run calls in Little Elm, Frisco, Aubrey, and Cross Roads. If you are just over the town line, the same team, same trucks, and same warranty apply. Our Shady Shores service area coverage means we can usually reach any of these communities within the same day, often within a few hours.
Serving Shady Shores, TX - Our Local Coverage Area
We’re based in the Shady Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Shady Shores
Dock gates in Shady Shores sit lower to the waterline and catch constant wind-driven moisture off Lake Lewisville. That moisture sits on the hinge barrels and pins, eats through paint, and causes rust that seizes the pin within a few seasons. The fix is a galvanized or stainless hinge with a greaseable pin, not another coat of paint. Call (432) 547-6481 if your dock gate is starting to sag.
In Shady Shores, the usual culprit is a shifted gate post. Expansive clay near the lake moves seasonally, tilting the post just enough to push the gate out of alignment with the safety beam. The sensors look fine, but the gate is no longer closing on the same path. We re-set the post, re-square the panel, and the false trips stop. Estimates are free.
Yes, in most cases. We weld the cracked picket or joint, reinforce the back side where needed, and match the existing profile. Full panel replacement is only necessary when the steel has rusted through in multiple places or the original panel was undersized for the opening. A welded repair in Shady Shores typically runs $150 to $450. Call (432) 547-6481 and we will assess it in person.
Sealed-bearing stainless rollers are the only thing that holds up on a lakefront slide gate in Shady Shores. Standard steel rollers rust, flat-spot, and seize within two or three seasons of wind-driven moisture. We replace rollers as a set and check the track at the same time, because a worn roller usually scores the rail it rides on. The price depends on gate weight and roller count, but it is almost always cheaper than replacing the operator the seized roller eventually burns out.
Usually yes. We cut the seized hinge pin and barrel out, then weld a new hinge assembly onto the existing post if the post itself is still sound. Last summer our crew replaced the lower hinge post on a swing gate at a Shady Shores Dr. waterfront estate after the original mild-steel post footing rotted at grade. The gate had sagged enough to trip the safety photocell and refuse to close on its LiftMaster operator. We cut out the old post, set a galvanized post footing in deeper concrete, swapped in stainless hinge pins, and re-squared the panel so the rack and pinion tracked clean, and the keypad entry worked on the first try. If your dock gate is seized, call (432) 547-6481. We will tell you what can be saved and what needs to be replaced, and the quote is free.
Call Ironworks Gate Co. for Gate Parts & Welding in Shady Shores
If your gate is sagging, seizing, or tripping its operator, do not wait until it will not close at all. A gate that fails on a lakefront lot in Shady Shores is a security problem and a safety problem, and the longer the corrosion works, the more expensive the repair gets. Call (432) 547-6481 and you will reach a live person who can schedule a technician. Estimates are free, pricing is settled before we start, and every job is covered by our 90-Day Done Right Promise. Victor Salinas and the Ironworks Gate Co. team have been fixing gates for over 42 years. We will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Shady Shores and the Denton County lakeshore since 1984.