DoorKing Keypad & Intercom Repair Nationwide

DoorKing Keypad & Intercom Repair: The Little Elm Owner’s Guide

DoorKing keypad and intercom repair in Little Elm typically runs between $220 and $480 installed, depending on whether we’re replacing a failed keypad face, a blown intercom board, or the full mounting assembly. Most DoorKing keypad and intercom jobs are completed in a single visit because we keep common DoorKing components on our trucks. The way owners usually discover the failure is gradual: the keypad works in the morning, stutters at noon, and by evening the gate won’t open from the street at all.

Call (432) 547-6481

We’re Ironworks Gate Co., an independent gate repair company serving Little Elm and the surrounding lake communities for over 42 years. We’re not affiliated with DoorKing, but we service their equipment daily. Victor Salinas grew up near the Little Elm Town Center back when the town was a fraction of its current size, and he’s been straight with homeowners here his entire career: he’ll tell you what the gate actually needs, not what runs up the invoice.

Which DoorKing Models This Applies To

DoorKing builds two keypad families you’ll find around Little Elm driveways. The first is the 1500-series keypad, a flush-mount unit with individual metal buttons that’s been installed on thousands of residential gates since the early 2000s. The second is the 1812 and 1830-series, which combine keypad and intercom into a single pedestal or wall-mount enclosure. The 6050 and 6100 telephone entry systems are the larger commercial cousins, but we see them on higher-end residential properties in Frisco Ranch and along the lake as well.

The parts are not interchangeable between these families. A 1500-series button contact will not fit a 6100 board, and a 1812 intercom speaker is a different size and impedance from the 1830. Before we load the truck, we ask for the model number printed inside the housing or on the control board itself. If the label is sun-faded, which happens fast in Texas, a photo of the keypad face and the wiring terminals is usually enough for our parts desk to match it correctly. For DoorKing specifically, OEM parts have tighter tolerance on the button springs and better weather sealing than most aftermarket equivalents. We stock OEM DoorKing parts alongside a short list of quality aftermarket boards we’ve tested in our own shop, and we’ll tell you plainly which one makes sense for a 12-year-old 1500-series versus a 3-year-old 6100.

Signs Your DoorKing Keypad or Intercom Is Failing

• Buttons need a second press (or a third): The carbon contacts under the buttons wear flat over time, especially in direct Little Elm sun. What feels like a dead button is often just a contact that’s lost its spring.
• Code works sometimes, not others: This usually points to a failing relay on the control board, not the keypad itself. The relay heats up, sticks, and releases unpredictably. We test this with a meter before recommending any part.
• No sound from the intercom speaker: The speaker cone in DoorKing units degrades in humidity and heat cycling. Lake-adjacent properties get hit hardest because of moisture. A silent intercom is a safety problem: delivery drivers and family members can’t announce themselves.
• Garbled or crackling audio: A failing microphone or a corroded connection at the board. Electrical tape fixes don’t last here. We replace the connector and the mic element together.
• Keypad face is cracked or water-stained: Once water gets past the faceplate, it migrates to the board and everything downstream. A $20 replacement faceplate ignored becomes a $400 board replacement.

Replacement Cost & What’s Included

Here’s what DoorKing keypad and intercom repairs cost in Little Elm when we do the work.

• Keypad faceplate replacement (1500-series): $45 to $95 for the part, $70 to $110 labor. Total $115 to $205.
• Intercom speaker or microphone replacement: $40 to $80 for the part, $70 to $110 labor. Total $110 to $190.
• Control board replacement (relay or processor failure): $180 to $320 for the part, $90 to $140 labor. Total $270 to $460.
• Full keypad and intercom assembly (1812/1830 series): $260 to $420 for the unit, $110 to $160 labor. Total $370 to $580.
• Wiring repair or rerun (per run): $8 to $15 per foot plus $85 to $130 labor. Most residential runs are 30 to 80 feet.

The price covers diagnosis, part, installation, wiring cleanup, and programming your existing entry codes back into the new unit. We quote the full price before any work starts, and you approve it before a single bolt is turned. The finished job is protected by our 90-Day Done Right Promise, in writing. No paperwork on your end, no arguing, and no exceptions.

DIY or Call Us?

You can safely check a few things yourself before calling. Look for physical damage on the keypad face. Check whether the gate opens from the inside button but not the outside keypad; that isolates the problem. If you’re comfortable with a screwdriver, you can open the housing and look for water damage, loose spade connectors, or a board that’s visibly browned from heat. That’s where DIY should stop.

DoorKing keypads run on low-voltage DC power from the gate operator, so the electrical shock risk is minimal. The real danger is in misdiagnosis. We’ve had Little Elm homeowners replace a $90 keypad face when a $3 connector was the problem, and others who wired a new board incorrectly and fried a working gate operator. If you’ve checked the basics and it’s still dead, call us at (432) 547-6481. We’ll be there when we say, and the price is settled before we touch a wire.

FAQs