Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Corinth
If your driveway gate in Corinth sags, scrapes, or stopped responding to the remote, you need a shop that understands what these 20-year-old iron gates actually do when North Texas clay starts moving. Most repair calls we take in Corinth involve two problems at once: a worn hinge or cracked weld up top, and a gate post below that the black soil has pushed out of plumb. That combination is what separates a quick parts swap from a real repair. Our crews serve Corinth from the Dallas-Fort Worth metro office, and a live person answers at (432) 547-6481 whenever you call.
Why Ironworks Gate Co. Is Corinth’s Preferred Gate Parts & Welding Company
We have been working on ornamental iron gates since 1984, long before most of Corinth’s subdivisions were platted. The homes here were built out fast between the mid-1990s and mid-2000s, and that uniform build era means we see the same gate hardware aging out across the city at roughly the same time. When we send a technician to a home off Post Oak Drive or into the Corinthian Estates neighborhood, he has already fixed a dozen gates just like yours this month. That repetition is its own kind of expertise.
Every technician who works in Corinth is background-checked and uniformed, and every job we finish is protected by our written 90-Day Done Right Promise. If a hinge we replaced works loose or a weld cracks, we come back and make it right. No paperwork, no debate. Victor Salinas built this company on the idea that the 400th job gets the same care as the first, and that standard applies to every gate parts and welding call we run in Corinth.
Customers in Corinth reach us the same way everyone else does: by calling (432) 547-6481 and talking to a person. Not a phone tree. Not a callback queue. A dispatcher who knows the difference between a swinging gate and a sliding one and can schedule you for the same day when the repair is urgent.
Our Gate Parts & Welding Services in Corinth
This is the full scope of our Gate Parts & Welding work, applied to the specific ways gates fail in Corinth.
Hinge Replacement
Wrought-iron drive gates in Corinth hang on barrel hinges that were never designed for 25 years of clay heave. As the post tilts seasonally, the hinge takes the load unevenly. Pins wallow out, leaves crack, and the panel starts dragging on the concrete approach. We replace hinges with heavier-gauge steel and add sag correction brackets where the post angle can be pulled back without a full reset. When the post is too far gone, we address that before re-hanging the panel so the new hinge lasts.
Post Replacement
The original footings poured during Corinth’s boom years were often shallow, and Denton County’s expansive clay has spent two decades working them loose. A leaning post is not just an alignment issue; it is also a safety issue if the weight of the panel is no longer supported properly. We dig out the old footing, set the post in a deeper pour with proper gravel drainage, and weld the hinge mounts back onto solid steel. For homeowners near Lake Sharon or along Shady Shores Road, we commonly reset posts that have moved three inches or more from original plumb.
Rail Repair
When a sagging gate panel binds on the latch side, the top or bottom rail usually carries the stress. We see cracked welds at the rail-to-picket joints and bowed horizontal rails on both swing and slide gates throughout Corinth. The fix is straightforward: grind out the cracked weld, reinforce the rail with an internal sleeve where needed, and re-weld. The harder question is always whether the post underneath is the real culprit, and we answer that before we lay down a single bead.
Custom Welding
Some Corinth gates have ornamental scrollwork that is no longer manufactured. If a picket snapped or a decorative finial broke off, we replicate the piece in our shop rather than telling you to replace the whole panel. We also weld rack and pinion conversions for slide gates, build steel reinforcement frames for panels that have sagged beyond simple hinge work, and fabricate mounting plates for new operators when the old Apollo or Linear housing no longer lines up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corinth
We stock common hinge types, hinges pins, latch hardware, and mounting plates for Corinth service calls, and we are trained on nine major gate automation brands including LiftMaster, FAAC, Elite, and Mighty Mule. The brand on your opener matters less than you might think. What matters is whether the board inside is still made. Around Corinth, a lot of them are not, and we will tell you that plainly before you spend money on a discontinued part.
Common Gate Parts & Welding Problems We See in Corinth Homes
- Clay-heaved hinge posts. Corinth sits on Vertisol soil that swells and shrinks several inches a year. That movement tilts posts gradually, and a panel that hung true for 15 years starts binding on the latch and tearing at the hinge welds.
- Discontinued Apollo and Linear control boards. The automated openers installed during Corinth’s 1995-2005 build-out window are largely orphaned now. Heat above 100°F cooks the boards, and the direct replacement part simply does not exist anymore.
- Shallow original post footings. Many 1990s-era gate posts in Corinth were set in concrete too thin for the soil conditions. After two decades of wet-dry cycling, the footing cracks and the post leans into the gate’s swing path.
- Sagging panels with cracked rail welds. A gate that scrapes the driveway near the latch is almost always the result of hinge wear plus post movement. The panel itself rarely needs replacing, but the rail welds and hinge mounts usually need attention.
Pricing for Gate Parts & Welding in Corinth, TX
A clear price matters more than a vague promise, so here is the straight version for Corinth. Hinge replacement on a standard ornamental swing gate runs $220-$480 depending on how many hinges and whether sag correction brackets are needed. Post replacement with a new concrete footing is $380-$750 per post, and most Corinth jobs involve one post rather than two. Rail repair and custom welding run $150-$350 for typical repairs, with full rack and pinion conversions priced by the foot after we measure your gate. A complete operator retrofit, which is common here when an old Apollo or Linear board dies, runs $900-$1,800 installed with new safety edges and photocells. Prices in Corinth run slightly higher than rural Denton County because nearly every job includes a structural post adjustment, not just a parts swap. Every quote is set in writing and agreed before any work begins, so the number on the invoice is the number on the estimate. Call (432) 547-6481 for a free estimate.
Why Do Gate Posts in Corinth Tilt Seasonally Even When They Were Installed Properly?
Because the soil under Corinth is expansive black clay (Vertisol), and it does not care how well the post was set. The clay absorbs water in the wet season and swells several inches upward, then shrinks and cracks in the dry season. If the footing is shallow, the post rides that movement and leans. A proper install can slow the process, but after 15 to 25 years, most original footings in Corinth have lost the fight. The fix is a deeper footing with gravel drainage at the base and a post reset that brings the panel back to plumb.
My Early-2000s Automatic Gate Opener Stopped Working - Can You Just Replace the Control Board?
Sometimes, but not as often as we would like in Corinth. The Apollo and Linear operators installed in many Corinth subdivisions during the 1995-2005 build-out have been discontinued, and the manufacturer no longer makes control boards for them. There are aftermarket retrofit boards for a few models, and if one exists for your operator, we will quote it. More often, the honest answer is that a full operator swap to a current LiftMaster or another supported brand costs about the same as chasing obsolete parts and gives you a unit we can actually service for the next decade.
The Gate Sags Toward the Latch Side and Scrapes the Driveway - Do I Need a New Panel or Can Welding Fix It?
In almost every Corinth case we see, the panel itself is fine and the problem is the hardware and post underneath it. The hinge pins wear, the post tilts, and the panel sags gradually until it catches the concrete. We can weld reinforcement to the rail joints, replace the hinges, and reset the post. That combination usually restores the swing without replacing a panel that still has decades of life in it.
Can You Weld a Rack and Pinion Conversion Onto My Existing Slide Gate?
Yes. We weld a steel rack along the bottom rail of your existing slide gate and mount a compatible motor with the drive pinion. The conversion works on most ornamental and box-frame slide gates in Corinth, and we include new safety devices like photocells and a reversing edge to bring the unit up to current UL 325 entrapment standards. We need to measure the gate’s travel length and check the condition of the rail before quoting, which we do free of charge.
Are My Old Gate Photocells and Safety Edges Still Compliant on a 15-Year-Old Swing Gate?
Probably not, and this is a big one for Corinth homeowners. UL 325 entrapment standards changed after many of the gates in this city were installed. If your gate is over 15 years old and still has its original safety equipment, the photocells may be positioned incorrectly by today’s standards, the reversing edge may have failed, or the original operator may lack the required entrapment sensing altogether. We flag non-compliant equipment on every repair visit and quote the retrofit as part of the job, not as an add-on you have to ask about.
We Also Serve Cities Near Corinth
Our gate parts and welding service also covers Corinth and the surrounding communities we have worked in for years, including Little Elm, Frisco, Aubrey, and Cross Roads. If you are on the edge of town or just over the Denton County line, call (432) 547-6481 and we will tell you exactly when we can be there.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Parts & Welding in Corinth
For a gate stuck open or a panel off its hinges, we commonly reach Corinth the same day you call. (432) 547-6481 goes straight to a live dispatcher, and we schedule emergency runs for drive gates that will not close, since an open gate is a real security problem for a home. For non-emergency parts work, we usually schedule within one to three days depending on the time of year.
We cover all of Corinth, including homes in the Corinthian Estates area, neighborhoods along Post Oak Drive and Shady Shores Road, and the subdivisions near Lake Sharon. There is no corner of the city we route around. If your gate is anywhere inside Corinth city limits or just outside them, we will come out.
Yes. When a gate panel breaks free from its hinges or a weld snaps and leaves the driveway unsecured, call (432) 547-6481 any hour of the day or night. A live person answers, and we treat an unsecured gate as a priority repair. The price for emergency work is quoted before we dispatch, so you know the cost before the truck rolls.
Corinth’s pricing tends to run a little above what you would pay in a rural part of Denton County, and the reason is the soil. Because most Corinth gate repairs include both a mechanical fix and a structural post reset, the scope is naturally larger than a parts-only job in a city built on stable ground. You are not paying more for the same work. You are paying for the extra post work that Corinth’s clay demands.
It is valid everywhere we work, and Corinth is no exception. The 90-Day Done Right Promise means that if something we welded, replaced, or reset fails within 90 days, we return and correct it without any charge. It is in writing and it does not require a paperwork review or a manager’s approval. Victor Salinas stands behind every gate job we finish in Corinth.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Corinth and the surrounding Denton County communities.