Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Frisco
Gate repair in Frisco usually costs between $185 and $520 for common fixes like hinge replacement, post realignment, and operator repairs, and most jobs are completed in a single visit. If your gate won’t open, sags at the latch, or the motor grinds against a shifted post, call us at (432) 547-6481 and a live person answers, day or night. We work on ornamental iron driveway gates and automated entry systems throughout Frisco every week, from Stonebrook Parkway to El Dorado Parkway, and we know what this soil does to a gate post.
Frisco is not an easy city on gates. The same Blackland Prairie clay that makes the area good for ranching is hard on anything set in the ground. But that is our craft, and we have been doing it since 1984.
Why Frisco Homeowners Call Ironworks Gate Co. First
We are a dedicated gate company, not a handyman crew that also happens to work on gates. That distinction matters in Frisco, where most homes in master-planned communities like Newman Village, The Trails, and Christie Ranch carry HOA-mandated ornamental iron gates that have to look right and function right, every day. Homeowners here have told us plainly: they want the job done once, correctly, and guaranteed in writing. That is what we do.
Our technicians are background-checked and uniformed, and they work by a simple code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. When we finish a repair, we leave the gate closing like the day it was hung, and we put our 90-Day Done Right Promise behind every job in writing. If it is not right, we come back. No paperwork, no argument.
Victor Salinas leads our crew, and he has spent decades on ironwork and gate automation. That depth shows in how we diagnose a problem. A gate that binds at the latch is rarely just a hinge problem here. More often, it is a post that has moved. We check the post first, because in Frisco, the post is usually where the trouble begins. You can read more about how we approach this work on our Gate Repair team page.
Our Gate Repair Services in Frisco
Most of the work we do in Frisco falls into four areas. Here is what each one involves, and what it typically costs in this market.
Electric Gate Repair
Electric gate repair in Frisco commonly means a control board that has given out, a receiver that no longer talks to the remote, or a motor that has burned itself out fighting a shifted post. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, and we carry boards, remotes, and safety components for all of them. A typical control board replacement in Frisco runs $220 to $390, and a full operator replacement on a single swing gate usually lands between $650 and $1,350, depending on the brand and whether the post needs rework at the same time.
Automatic Gate Repair
Automatic gate repair starts with finding out whether the problem is in the motor, the limit switches, the safety loops, or the gate itself. In Frisco, the answer is often the gate itself: the post has drifted and the motor is now working against a misaligned track. We correct the alignment first, then address the operator. If the operator is older and lacks modern entrapment protection, we will tell you honestly whether a retrofit is worth the money or whether replacement is the better five-year decision. Either way, the price is settled before we turn a bolt.
Hinge & Post Repair
Hinge and post repair is the most common call we get from Frisco homeowners with gates built between 2000 and 2016. The original posts were set in clay that swells with spring moisture and shrinks through August. Over twenty cycles of that, a post can move enough to throw a gate a full inch out of plumb. We reset posts in concrete footings, replace worn hinge barrels, and reinforce the attachment points so the gate does not sag back out of alignment. Typical hinge and post repair in Frisco runs $240 to $680, depending on the number of posts and the condition of the surrounding concrete or stone work.
Gate Realignment
Gate realignment is the service that saves a lot of Frisco homeowners from buying a new gate they did not need. When a double swing gate starts dragging or the latch no longer lines up, the frame is rarely the problem. It is almost always the posts. We bring the gate back to plumb, adjust the hinge geometry, and tune the operator so the full open and close cycle is smooth and quiet. A standard realignment in Frisco costs $165 to $320. If the motor was damaged by running out of alignment, we will quote that separately and up front.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We are trained and equipped on nine major gate-automation brands, and that is not marketing language. Our trucks carry components for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a 2008 LiftMaster board fails on a Stonebriar estate gate, we can usually have the replacement in hand that same week, because we stock parts locally rather than ordering from out of state. That means less downtime for a gate your family relies on every day.
Common Gate Repair Problems We See in Frisco Homes
We have been repairing gates in Frisco long enough to see patterns. These four problems account for most of the calls we run:
- Heaved posts and tilted gate leaves: Blackland Prairie clay swells with spring rain and shrinks in summer drought. Over years, the posts lean, the gate binds, and the motor fights a losing battle. The fix is post reset and realignment, not just a stronger motor.
- Obsolete control boards without entrapment protection: Pre-2010 operators often lack modern UL 325 photocell compatibility. When an HOA requires entrapment protection on a repaired system, those old boards cannot be upgraded in place. We show you the retrofit option and the replacement option, with numbers for both.
- Sagging gates with fatigued welds: When a gate sags for years and gets repeatedly “adjusted” without resetting the post, the weld points on the ornamental iron finally crack. We repair those welds and correct the root cause in the same visit.
- Powder-coat failure and surface rust: Frisco summers top 100 degrees, and that heat accelerates coating breakdown on iron gates. We grind out rust, treat the steel, and weld in new sections where the metal has thinned. This work is often coordinated with HOA approval, so we build that step into the schedule.
Pricing for Gate Repair in Frisco, TX
Most gate repairs in Frisco fall into these ranges, quoted and agreed before work begins:
- Gate realignment: $165 - $320
- Hinge replacement: $185 - $410
- Single post reset and footing: $195 - $450
- Control board replacement: $220 - $390
- Weld repair and local rust remediation: $160 - $380
- Full operator replacement (single swing gate): $650 - $1,350
You will never get a bill bigger than the number we agreed on. We quote the job, write it down, and do the work at that price. Estimates are free, and we also offer a Free Second Opinion on any written estimate from another company. If you want to know what your exact gate needs, call (432) 547-6481 and we will walk you through it honestly.
We Also Serve Cities Near Frisco
Our crews run daily through Frisco and the surrounding communities, including Prosper, Aubrey, Little Elm, and The Colony. If you live in one of those cities, you can reach us at the same number, and we will treat your gate with the same care. For a full picture of what we do across the area, see our page on Gate Repair in Frisco and the communities we cover.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Frisco
Frisco sits on Blackland Prairie clay, which is far more expansive than the soils under most of Plano. The clay absorbs spring moisture and swells, then contracts hard through summer drought. That seasonal movement can shift a gate post a full inch or more over a decade, which is why we see so many more alignment and binding problems in Frisco than in cities just a few miles west.
Sometimes it can, and sometimes it cannot. If the board has even a basic accessory terminal, a photocell kit can be added. But many pre-2010 boards have no entrapment-protection input at all, and those cannot be made compliant. In that case, full replacement is the answer. We will show you the board, explain what is possible, and give you a written price for either path before you decide. Call (432) 547-6481 for an exact quote.
In communities like Starwood, Shaddock Creek, and Lexington, HOA architectural review committees often require pre-approval and exact-match ironwork before any visible panel repair or replacement can proceed. That means a simple hinge repair can wait on documentation if we are altering the panel. We have done this enough to build HOA approval time into the schedule from day one, and we can supply the fabrication drawings the committee wants to see.
Because so much of Frisco was built in a compressed window from roughly 2000 to 2020, entire HOA neighborhoods are aging on the same timeline. The original operators, hinges, and posts are all reaching the end of their service life together. When one house on the street needs a board replaced, three more usually follow within a year. We see this pattern across Preston Highlands, Phillips Creek Ranch, and every other master-planned pocket of the city.
A double swing gate on Blackland Prairie clay should be checked every 12 to 18 months. The check takes about fifteen minutes. We look at post plumb, hinge wear, latch alignment, and operator torque. Catching a quarter-inch of drift early costs a small adjustment. Catching it three years late costs a post reset, and sometimes a new motor. Our $89 Seasonal Tune-Up covers exactly this kind of check, and it is the cheapest insurance you can buy for a $3,000 gate system.
If your gate is giving you trouble in Frisco, call us. The number is (432) 547-6481. A live person answers, 24 hours a day, 7 days a week. We will schedule a visit, quote the work up front in writing, and stand behind it with our 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Frisco and the surrounding communities since 1984.