Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Hickory Creek, TX
When your automated driveway gate stops closing or a hinge tears loose from a sagging post, it’s rarely a small problem in Hickory Creek. The lake air has been working on that metal since the day it was hung, and the clay under the posts has been moving with every wet-dry cycle. We fix gates like yours here every week, usually in a single visit, and we quote the full price before we touch a single bolt. Call (432) 547-6481 and a real person answers, day or night.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Hickory Creek Homeowners Choose Ironworks Gate Co.
Most of our Hickory Creek calls come from people who have already had a gate “fixed” once and watched it fail again six months later. That frustrates us as much as it frustrates you. Victor Salinas built this company on a simple rule: if we put our hands on a gate, it stays fixed. Every job leaves with our written 90-Day Done Right Promise in your hand. If something isn’t right, we come back. No paperwork, no arguing, no exceptions.
We work throughout Hickory Creek, from the lakefront properties along Turbeville Road down to the established streets of the Hickory Creek East subdivision and the newer builds off N. Hickory Trail near the lake. Our technicians are background-checked, uniformed, and trained on nine automation brands. The 400th job gets the same care as the first.
Gate Repair Services We Offer in Hickory Creek
Gate Repair
We fix what’s broken: snapped welds, seized hinges, leaning posts, bent tracks, and operators that grind but won’t move. Most Hickory Creek repair jobs are completed the same day we arrive, and every repair carries the 90-Day Done Right Promise in writing.
Learn more about our gate repair work in Hickory Creek.
Gate Installation
A new gate in Hickory Creek has to be built for this climate. We set posts below the clay heave line, spec hardware rated for lake humidity, and hang the gate so it swings true the day it’s installed. You get a free measure and a written price before any work is scheduled.
Learn more about our gate installation in Hickory Creek.
Gate Motor & Opener
If your opener is a LiftMaster, Elite, DoorKing, or Mighty Mule, our technicians carry the correct diagnostic tools and replacement parts on the truck. We troubleshoot the motor, limit switches, safety eyes, and control board in one visit so you don’t wait on a second trip for parts.
Learn more about our gate motor and opener services in Hickory Creek.
Gate Access Control
Keypads, intercoms, vehicle sensors, and smartphone entry systems need clean wiring and proper grounding, especially in a lakeside environment where moisture finds every weak connection. We install and repair Gate Access Control in Hickory Creek on both new and existing gates.
Gate Parts & Welding
Our Hickory Creek Gate Parts & Welding team fabricates and welds on site: replacement hinges, latch assemblies, post caps, and decorative scroll repairs. When an ornamental iron gate on a Hickory Creek estate snaps a picket or a hinge plate, we repair it so the fix disappears into the original work.
Neighborhoods We Serve in Hickory Creek
We work throughout the Hickory Creek area, with the fastest response for calls inside the town limits and along the lake shore. Typical same-day dispatch holds for the following neighborhoods:
- Hickory Creek East
- Lakefront estates off Turbeville Road
- Properties along N. Hickory Trail
- Homes near Lake Cities Park and the 75065 ZIP corridor
Why Hickory Creek’s Climate & Housing Affect Gate Repair
Hickory Creek sits along the western shore of Lake Lewisville, and that lakefront location drives the pattern of gate failures we see here. Persistent humidity accelerates oxidation on hinges, latches, and weld joints. Iron gates that would last twenty years in an inland Denton County suburb can show severe rust around fasteners and weld points in half that time here. It’s not a quality problem with your gate. It’s chemistry.
The second factor is the soil. Denton County’s expansive black clay swells when it’s wet and shrinks when it’s dry. That movement heaves gate posts out of plumb, binds slide gates on their tracks, and trips the safety sensors on automated operators. Lakeside lots are particularly susceptible because contractors sometimes hit water-saturated soil during footing excavation and cut the depth short. A few dry months followed by a wet fall is exactly when we start getting calls about gates that worked fine in June and won’t close in October.
Pricing for Gate Repair in Hickory Creek
Every job gets a square deal: the full price is quoted and agreed before any work starts. No surprises on the bill.
- Hinge or latch replacement: $120-$240 typical range depending on iron weight and fabrication needed
- Post straightening or resetting: $250-$700 depending on footing depth and soil conditions
- Opener motor or control board repair: $180-$450, parts included in most single-unit swing gate jobs
- Slide gate track realignment: $180-$400 depending on track length and damage
- Full service call + diagnostic: $89, credited toward the repair if you proceed
We offer $50 off any repair over $250, a free second opinion on any written estimate, and a standing 5% senior and veteran discount. An $89 seasonal tune-up is also available if you want us to catch small issues before they become big ones.
Service Area - Cities Near Hickory Creek
Along with Hickory Creek, our crews cover the surrounding lake-area communities. If you have property in Little Elm, Frisco, Aubrey, or Cross Roads, the same written guarantee applies. Dispatch is coordinated from our Dallas-Fort Worth office, with local crews serving Hickory Creek directly.
Serving Hickory Creek, TX - Our Local Coverage Area
We’re based in the Hickory Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hickory Creek
Most Hickory Creek gate repairs fall between $180 and $450 when it involves opener troubleshooting, hinge replacement, or track realignment. Post resetting and heavier welding fabrication run higher. Every job is quoted up front, in writing, before we begin. Call (432) 547-6481 for an exact price on your gate.
Yes. We keep same-day availability for gate failures in Hickory Creek, especially when a gate is stuck open and the property is unsecured. A live person answers the phone 24/7. Call and tell us what’s happening and we’ll tell you honestly when a technician can be there.
The expansive clay under your gate posts swells after rain and can push the posts slightly out of alignment. That binds the hinges or throws the slide track off level, tripping the safety sensors. This is the most common call we answer in Hickory Creek after a wet stretch. The fix usually involves resetting or reinforcing the post footing, not just adjusting the opener limits.
We are trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the overwhelming majority of automated gates installed across Hickory Creek. Tell us your brand and model when you call and we’ll confirm the technician arrives with the right parts on the first trip.
A full installation includes removal of the old gate and operator, post excavation and setting below the clay heave line, new gate fabrication or assembly, opener installation and programming, safety sensor setup, and a final alignment on a completed job that is covered by our 90-Day Done Right Promise. We start with a free measure and a written price. Call (432) 547-6481 to schedule yours.
Contact Ironworks Gate Co. in Hickory Creek
A gate that won’t close isn’t something to put off. A gate that’s stuck closed is worse. Call (432) 547-6481 for a free estimate on any gate repair in Hickory Creek. We’ll give you an honest diagnosis, a written price, and a repair date that works. And if we do the work, you get the 90-Day Done Right Promise in writing before we leave the driveway.
Written by Victor Salinas, Owner at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hickory Creek Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker