Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Frisco, TX
A gate that won’t open in Frisco usually has one of two causes: a motor overloaded by a post that shifted in Blackland Prairie clay, or hardware from a 2005-era master-planned build finally wearing out. You’ll find both on nearly every street from Starwood to The Trails. We answer the phone around the clock at (432) 547-6481, and a live person picks up on the first ring. If your driveway gate is binding, sagging, or dead at the panel, call and talk through it with someone who has seen your exact gate a hundred times in Frisco’s subdivisions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Frisco Homeowners Choose Ironworks Gate Co.
Frisco is a town where HOA standards are serious and ironwork is everywhere. We respect that. Our technicians work in uniform, background-checked, and careful around your property the way they’d be at their own mother’s house. The crew serving Frisco gets a steady stream of calls from places like Starwood and Shaddock Creek, where ornamental iron driveway gates are standard on the elevation and the HOA notices when a panel rusts. Homeowners in Phillips Creek Ranch and Lexington have called about everything from a Mighty Mule opener that quit after a power surge to a sagging double gate that scrapes the driveway every morning. We’ve replaced hinges, rehung panels, rebuilt operator arms, and brought more than a few old gates back to closing clean and quiet. Every job we finish carries our 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No arguing, no paperwork, no exceptions.
Gate Repair Services We Offer in Frisco
Gate Repair
A sagging leaf, a hinge starting to tear from the post, a keypad that works when it wants to. We repair the full gate: hinges, welds, panels, pickets, post alignment, and latching hardware. Most repairs are finished in one visit with the price settled before we turn a bolt. Learn more about our Gate Repair in Frisco.
Gate Installation
New ornamental iron, a neighborhood-standard design the HOA will bless, or a full driveway gate built to the exact dimensions of your opening. We handle custom fabrication where it’s needed and connect you to the same ironwork standards the rest of the block has. Learn more about our Gate Installation in Frisco.
Gate Motor & Opener
Automation is half the gate. We service LiftMaster, FAAC, Elite, and six other major opener brands, so the fix lands on the first visit no matter what is bolted to your post. Overloads, sensor faults, stripped gears, and dead receivers are all routine for our techs. Learn more about our Gate Motor & Opener in Frisco.
Gate Access Control
Keypads, remotes, intercoms, and the wiring between them. We bring a control panel back from the dead or design a simple, reliable retrofit that works with the hardware you already own. The job gets quoted up front, before any work starts.
Gate Parts & Welding
When a post twists or a hinge rips free, welding is the real repair. Our techs weld on-site, fabricate reinforcement plates, and match the original iron profile so the repaired section disappears into the gate.
Neighborhoods We Serve in Frisco
Our crews work across Frisco every week. Typical response for a repair call in most neighborhoods is same-day or next-morning, depending on the hour you reach us.
- Starwood
- Shaddock Creek
- The Trails
- Phillips Creek Ranch
- Lexington
Why Frisco’s Climate & Housing Affect Gate Repair
Frisco sits on Blackland Prairie clay that swells with spring rain and contracts hard in the summer heat. That seasonal movement heaves gate posts, tilts them out of plumb, and pulls automated operators out of alignment. A gate that closed fine in March will bind in June and overload the motor in July, unless the post is set deep enough and the operator’s limit switches are re-adjusted for the movement. We see this cycle every year across Frisco’s 75034 and 75035 neighborhoods, and we adjust for it on every visit rather than just patching the symptom. Summer heat has a second effect: ornamental iron panels in full sun bake powder-coat finishes until they chalk and expose bare steel. Rust followed by perforation is a common call from homeowners in The Trails and Starwood who notice a picket bubbling near the bottom of the gate.
Pricing for Gate Repair in Frisco
Most gate repairs in Frisco land between $185 and $550. Replacing a hinge and re-welding a cracked picket tends to run $185-$350. A broken operator arm or replacement limit switch is usually $220-$450. Full operator replacement with a new LiftMaster or FAAC unit generally falls between $850 and $2,400, depending on the opener model and how much wiring gets replaced. The price is written down and agreed before work starts. You never get a surprise line item on the invoice. We also offer a $89 seasonal tune-up, a $50 credit on any repair over $250, and a 5% discount for seniors and veterans, year-round.
Service Area - Cities Near Frisco
We serve Frisco and the communities around it, including Prosper, Aubrey, Little Elm, and The Colony. If your gate is down in one of these cities, the same crew and the same 90-Day Done Right Promise apply.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Frisco
Most gate repairs in Frisco run between $185 and $550, with full opener replacement from $850 to $2,400. We quote the exact number before any work starts. Call (432) 547-6481 for a free estimate.
In most Frisco neighborhoods we can have a technician out the same day or by early the next morning, and most repairs are done in a single visit. A live person answers the phone 24 hours a day, so call (432) 547-6481 and we will tell you straight when we can be there.
Communities like Starwood, Shaddock Creek, and Lexington often require architectural review before a visible gate panel gets repaired or replaced. We build that review time into the schedule and can provide the panel documentation and material details the HOA asks for. It saves a lot of back-and-forth if you know which documents your committee requires, and we’re used to handling it.
Frisco’s expansive clay soil moves with moisture. Spring rain swells the ground and tilts the gate post; summer drought shrinks it back. Each movement shifts the gate’s geometry enough to bind an automated opener. We correct the alignment and set the post or the operator so the seasonal movement is absorbed instead of passed into the motor.
We are certified on nine automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule. Whatever opener is on your driveway, we likely carry the diagnostics and the parts for it on the truck. Call (432) 547-6481 and tell us what’s on the post; we’ll tell you if we can get it running in one trip. Usually we can.
If your gate is stuck, loud, or sagging in Frisco, call (432) 547-6481. A live person answers any hour, estimates are free, and every job is backed by our written 90-Day Done Right Promise. We will be there when we say, and the price you hear is the price you pay.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Frisco and the surrounding communities.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Frisco Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales